Athens GA Water DamageWater damage restoration cost: what to expect
Prices depend on how much water, what kind of water, and how long it sat. Here are published national figures to help you judge an estimate.
Call (844) 578-1833National averages
These figures come from two published cost guides. They are national numbers, not quotes for Athens, and your job could cost less or more. Use them to see whether an estimate is in a normal range.
| Source | Average | Typical range |
|---|---|---|
| Angi (2025 data) | $3,822 | $1,361 to $6,282 |
| Bob Vila | $3,455 | $1,305 to $5,707 |
Angi notes that costs can be as low as $450 or as high as $16,000, depending on the source and extent of the damage.
Cost per square foot by type of water
Restoration is often priced by the category of water, because dirtier water needs more protection, removal and disinfection.
| Water type | Angi | Bob Vila |
|---|---|---|
| Clean water (category 1) | $3.50 per sq ft | $3 to $4 per sq ft |
| Gray water (category 2) | $5.25 per sq ft | $4 to $6.50 per sq ft |
| Black water, such as sewage (category 3) | $7.50 per sq ft | $7 to $7.50 per sq ft |
Angi gives an overall range of about $3 to $7.50 per square foot. These figures cover water removal and drying. Repairs and replacing materials cost extra.
Examples from published guides
- A burst pipe, including repair and the associated damage: $1,000 to $4,000 (Angi).
- A basement with about one inch of clean water from a burst pipe: $500 to $1,500 (Angi).
- A basement with two feet of water from a sewage backup: $2,800 or more (Angi).
- Mold removal is priced separately from restoration, at an average of $2,225 (Angi).
What changes the price
- The category of the water and the class of damage. Angi says only a licensed professional can categorize it.
- How large an area is wet, and how deep the water went into walls, floors and framing.
- Which materials are damaged and whether they can be dried or must be removed.
- How long the damage sat before work began.
- The cause, whether mitigation alone is needed or full remediation and rebuilding as well.
- Local labor rates. Bob Vila puts labor at $70 to $200 per hour on average.
Getting an estimate you can compare
- Ask for the estimate in writing, with the scope itemized.
- Ask what equipment is used, for how many days, and whether moisture readings will be recorded.
- Ask which materials will be removed and who handles the rebuild afterward.
- Ask what is included in the price and what could change it, before work starts.
Insurance and your deductible
If the loss is covered, your policy pays after your deductible, and coverage depends on the cause. Sudden and accidental damage, such as a burst pipe, is commonly covered. Rising flood water and long-term leaks are commonly treated differently. Read your policy, tell your insurer promptly and keep photos and receipts.
Figures are from Angi and Bob Vila and may change. Athens GA Water Damage does not set prices. Independent companies give their own estimates.
Common questions
Is the price per square foot or per job?
Both are used. Guides quote per-square-foot ranges by water category, and many companies give a job estimate based on equipment, days and materials removed. Ask which method yours uses.
Why is sewage cleanup more expensive?
Contaminated water needs more protective measures, removal of porous materials and disinfection, which is why published guides put black water at the top of the per-square-foot range.
Does insurance pay for restoration?
It can for sudden and accidental losses, subject to your deductible and exclusions. Rising flood water and long-term leaks are commonly treated differently. Check your policy.
Should I get more than one estimate?
If time allows, yes, and compare scope as well as price. In an active emergency, getting the water stopped and removed comes first.
Water coming in right now? Call and we will connect you with a local restoration company, any hour.
Call (844) 578-1833Calling is free. Ask the company for an estimate before work begins.